Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1794-ADN is a DeviceNet adapter module for use with the 1794 Flex IO product family. Flex IO family consists of compact and modular modules primarily used for distributed I/O applications. The 1794-AND when utilized, is made of Two (2) individual parts - the terminal base and adapter module with power supply. These two parts are installed together to form a single unit.
The DeviceNet adapter has diagnostic indicators, Devicenet wiring terminals, 24VDC wiring connections and Node address switch for specifying the DeviceNet node address.
The modules DeviceNet indicators include Mod / Net status and I/O status. This module requires a 24VDC power supply and current of 400 mA to power the module and supply the Flex bus where the other modules are connected. Up to Eight (8) modules may be connected to an instance of a 1794-ADN. This module supports DIN rail or Panel mounting.
Specify the modules node address using the thumbwheel switches provide with the module. Valid settings are 00-63, decrease the number by pressing the - button and increase with the + button. Baud rate is set by baud detection during power-up.
This module supports data transmission rate of 125KB, 250KB and 500KB. Recommended DeviceNet cable for use with this module is Belden YR-29832 or equivalent.
The module supports PLC5, SLC500, CompactLogix and ControlLogix system. This DeviceNet adapter must be paired with a DeviceNet scanner module attached to the rack or locally supported by the controller.
This module has environmental specifications of 0 to 55oC (32 to 131F) operating temperature, Operating shock of 30 g peak acceleration and Vibration of Tested 5 g @ 10-500Hz per IEC 68-2-6.
VIIIVThe 1794-ADN is a communication module used with 1794 Flex IO product Family. It enables DeviceNet connectivity through the integrated DeviceNet communication port. This module supports DIN rail or Panel mounting.