Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 2711-T10C20L1 is a PanelView Ethernet I/P terminal capable of implementing Real-time operator and machine or process interaction from a convenient location. The unit is powered by a lotage range of 18-32 VDC with nominal supply of 24VDC.
The 2711-T10C20L1 is a PanelView 1000 that functions as a Human Machine Interface (HMI) device. This device may be installed in the plant floor or at a central control room. Either of the installation location, the enclosure that will be used to flush mount the device must offer an adequate protection to the electronic hardware inside the unit.
Ton install the device, flush mount the hardware on an enclosure NEMA Type 12/13, 4X (Indoor use only), IP54 and IP65 rated. Follow the recommended panel cut-out of 257 mm
(10.11 in.) (sides) and 390 mm (15.35 in.) (bottom and top. Maintain a 2-inch clearance on all sides of the hardware to allow adequate air flow. Mounting nuts must be tightened to a torque of 1.13 Nm
(10 lb-in) to provide a proper seal and to prevent potential damage to the terminal.
The terminal supports colored animation and indications with the utilization of the Color Active matrix TFT screen. It has a screen size of 10.4 inches with VGA resolution of resolution of 640 x 480.
The screen has an integrated backlight Active Matrix Thin-Film Resistor (TFT) with Cold Cathode Fluorescent (CCF) Backlight backlight that is capable of field replaceable 50,000 hr 1/2 life at 25 °C (77 °F). The operator initiates command through the touch interface provided by the embedded 384 touch cells within the terminal. These 384 cells are installed in 24 columns x 16 rows with each cell having a size of 26 x 30 pixels. Each Touch cell is capable of up to 1 million actuations.
The PanelBuilder32 software is the configuration software for the 2711-T10C20L1PanelView 1000 Standard Operator Terminal. Runtime functionality is designed using the software including the graphic screens which represent the real-time process mimic. VIIIVThe 2711-T10C20L1 is a Touch operated Human Machine Interface (HMI) component made by Bradley for PanelView Standard Operator Terminals. This terminal is 24VDC powered with a 10.4-inch display screen with Ethernet I/P and RS232 printer interface.