Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The adjustable AC drive with part number1305-BA09A-HA2 is designed for operation with a 3-Phase input rating of 380-460VAC and frequency of 5- to 6-Hz. It has a rated current output of 9.0 A and motor rating 4.0 kW (5.0HP). A Human Interface Module (HIM) is installed with the drive that can be used for local operation as well as parameterization of the drive.
VFD drives contribute to control efficiency and energy savings. It may be dynamically configured with start-up and shut down parameters and loaded with a normal operational setting when process has reached the normal state. Especially during start-up and Shut-down, starting and stopping currents are reduced as well as electrical impact to the AC motor itself is minimized thus, preventing damage to the motor.
This drive has physical dimensions of 210 (W) x 195 (H) x 179 (D) and approximately weighs 4.2 kilograms. It may be operated within a temperature range of 0 to 50 degrees C and Vibration limit of 1.0 G. This drive uses natural convection as its cooling method however, plant specific conditions must always be taken into consideration.
Built-in protection is installed with the drive such as Excessive temperature, DC Bus Voltage Fault, Power Ride through, Control Ride Through, Ground short, Line Voltage Transients, Output Short Circuit, Overload and Overcurrent protection. External protection may also be installed such as isolation transformers, line filters, reactors, surge suppressors and other applicable devices.
This drive has an integral I/O which includes Eight (8) Discrete Inputs, Two (2) Programmable Outputs, Two (2) Analog Inputs and One (1) Analog Output.
VIIIVThe 1305-BA09A-HA2 is an adjustable AC Drive with 3-Phase Voltage Input rated 380-460V, motor rating of 4.0 kW (5.0 HP) and output current of 9.0 A.