Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1761-L32AWA is a Programmable Logic Controller (PLC) and is part of the MicroLogix 1000-Series of controllers by Allen-Bradley and Rockwell Automation. Specifications for this Programmable Logic Controller include an operating temperature between 0 and 55 degrees Celsius for horizontal mounting and 0 to 40 degrees Celsius for vertical mounting. Storage temperature is between -40 and 85 degrees Celsius and operating humidity is between 5 and 95% (non-condensing). General specifications for the MicroLogix 1000 include 1 K of EEPROM memory and a 50,000 power cycle minimum. Terminal screw torque is 0.9 Newton-Meters (maximum) and the electrostatic discharge rating is EN 61000-2 at 8,000 Volts. This controller has an isolation voltage of 1,500 Volts AC. Analog input specifications for this hardware includes a voltage input range between -10.5 and 10.5 Volts DC and a current input range between -21 and 21 MilliAmps. Data type with regard to analog input is 16-bit signed integer and non-linearity is 0.002%. The input to output isolation is 30 Volts rated working/500 Volts isolation.
To install this device onto a DIN rail, the manufacturer recommends a series of steps to follow for proper installation; first, mount the DIN rail while ensuring that enough space is left for the device. Next, place the top slot of the controller over the DIN rail. Once this is complete, snap the controller into its proper positioning while pressing the PLC against the DIN rail. It should be noted that the manufacturer recommends the installer to leave the protective film on the controller until it has been properly installed.VIIIVThe 1761-L32AWA by Allen-Bradley and Rockwell Automation is part of the MicroLogix 1000-Series of Programmable Logic Controllers (PLC’s). It has 32 digital I/O and a 120 Volt AC input type. This hardware has a relay output type and a 120/240 Volt AC power supply.