Loading... Please wait...
- Home
- Allen Bradley PLC
- MicroLogix 1200
- 1762-IQ8OW6 MicroLogix
Related Products
-
1762-IQ8 MicroLogix $318.00
-
1762-IR4 MicroLogix $408.00
-
1762-L24BXBR MicroLogix $3,731.00
-
1762-L40AWAR MicroLogix $2,843.00
-
1762-OA8 MicroLogix $215.00
1762-IQ8OW6 MicroLogix
Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Refurbished Products
FedEx, UPS, and DHL
Product Description
Type a description for this product here...
Warranty Information
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
Product Overview
The 1762-IQ8OW6 by Allen-Bradley and Rockwell Automation is a DC-Input/Relay-Output Combination Module and is part of the MicroLogix 1200 Series. Input specifications for the 1762-IQ8OW6 include a 24 Volt DC Sink/Source voltage category and an operating voltage range between 10 and 30 Volts DC at 30 degrees Celsius and 10 to 26.4 Volts DC at 65 degrees Celsius. This hardware has 8 inputs and a minimum on-state voltage of 10 Volts DC. Maximum off-state voltage is 5 Volts DC while minimum on-state current is 2.0 milliAmps. Maximum off-state current is 1.5 milliAmps and maximum inrush current is 250 milliAmps. Output specifications include a voltage range between 5 and 265 Volts AC and 5 to 125 Volts DC. The 1762-IQ8OW6 has 6 commons per module and has a 6-Form A (normally open) output type. The continuous current per module is 8 Amps.
To mount the 1762-IQ8OW6 onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must make sure that the DIN latch is closed. After this, it is time to hook the top slot over the DIN rail. While pressing the module down against the top of the rail, secure the bottom of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-IQ8OW6 can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. For mounting on a panel, the preferred method is to use two M4 or #8 panhead screws, although M3.5 or #6 panhead screws may be used with a washer to ensure good contact.VIIIVThe 1762-IQ8OW6 by Allen-Bradley and Rockwell Automation is a DC-Input/Relay-Output Combination Module; it is part of the MicroLogix 1200 Series. This module has a 24 Volt DC Sink/Source voltage category and 8 inputs.