Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-OB32T by Allen-Bradley and Rockwell Automation is a Solid State 24 Volt DC Source Output Module. It is part of the MicroLogix 1200 Series of controllers. This hardware has 32 outputs and an IP20 enclosure type rating. Voltage category for the 1762-OB32T is 24 Volts DC source. Maximum bus current draw at 5 Volts DC is 175 milliAmps and 0 milliAmps at 24 Volts DC. Heat dissipation at 26.4 Volts DC is 3.4 Watts. The dimensions of this device are 90 x 40 x 87 millimeters, or 3.54 x 1.59 x 3.43 inches. Approximate shipping weight for the 1762-OB32T is 200 grams, or 7.05 ounces. This hardware has no pilot duty rating. Operating voltage range is 10.2 to 26.4 Volts DC while maximum off-state leakage at 26.4 Volts DC is 0.1 milliAmp. On-state voltage drop at 0.5 Amps is 0.3 Volts DC.
To mount the 1762-OB32T onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must ensure that the DIN latch is closed. After this, it is time to hook the top slot on the module over the DIN rail. While pressing down on the module against the top of the rail, secure the bottom part of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-OB32T can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver in the DIN rail latch at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-OB32T by Allen-Bradley and Rockwell Automation is a Solid State 24 Volt DC Source Output Module. It is part of the MicroLogix 1200 Series of controllers by Allen-Bradley. This module has 32 outputs and an IP20 enclosure type rating.