Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 20AB4P2A0AYNNNC0 is a PowerFlex 70 drive that is used to implement motor controls such as Start, Stop, Jog, Local, Remote, Automatic, Manual modes including the primary intended purpose which is speed control of an AC motor.
This drive has an output Power Rating of 0.75 kW or 1.0 HP. It is designed for low current motors as it produces 4.2 amperes, output voltage of 0 to 220VAC and frequency of 0 to 500 Hz. This drive is designed for installation with a Flange mount rated IP 20, NEMA/UL Type 1. It has a Rear Heatsink that is IP66, NEMA/UL Type 4X for indoor use and NEMA 12X for outdoor use.
This frequency drive has a programmable overload protection intended for single motor application. The drive is installed with an embedded I2 T function that is equivalent to an external thermal overload relay. This may be configured using the Three (3) internal parameters of the drive such as 042 [Motor NP FLA], 047 [Motor OL Hertz and 048 [Motor OL Factor. The motor is allowed to be operated up to 102% of the Full Load Current (FLA) continuously.
This drive supports computer-based configuration with the use of Connected Components Workbench (CCW) and DriveTools SP. Both software packages have advantages and disadvantage however, the most practical configuration for use is the CCW software. This is due to the fact that CCW is a free software and supports Windows 8.1 and Windows 10 software with a minimum RAM requirement of 8GB. DriveTools SP software is considered a legacy software as it supports Windows XP, Vista and Windows 7. All these operating systems are obsolete. VIIIVThe 20AB4P2A0AYNNNC0 is a PowerFlex 70 adjustable frequency AC drive. This drive has a Voltage Input rated 240 VAC, 3-phase and output Voltage of 0-220VAC with rated Current of 4.2 A and Power of 0.75 kW (1.0 HP), unfiltered emission.