Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 20AD3P4C3AYNANC0 is a PowerFlex 70 Adjustable Frequency AC drive. This electronic hardware is used for speed control of AC motors to enable it to be used in processes where modulating control is required. This drive is designed for operation with an input voltage supply of 480VAC, 3-Phase and output power of 3.4 amperes and 1.5 kW or 2.0 HP.
AC motors are considered Final Control Element (FCE) that serves as actuator of most mechanical devices. Modulating valves, Dampers, Fans, Louvers, Pumps are typical application that require modulating control. Not only modulating control but the ability to maintain a certain opening without is one important aspect why this device is being utilized. In some areas, the PowerFlex 70 may be referred to as Variable Frequency Drive (VFD) or Variable Speed Drives (VSD).
For shipping and design reference, this drive measures of 225.7mm or 8.89 inches for Height, 122.4 mm or 4.82 inches for Width and 179.8 mm or 7.08 inches for Depth. It weighs 2.71 kg or 6.0 lbs. Integral IGBT brake is included and this drive has a filtered emission.
This PowerFlex 70 product features a compact design as it comes with internal circuit protection such as AC input overvoltage and overvoltage trip, Bus overvoltage and undervoltage trip, Overcurrent trip, Software and Hardware current limit, line transients, Short circuit and ground fault trip. The Heat sink thermistor is monitored by the microprocessor.
The rated range of input frequency to this drive is 47 to 63 Hz and full current rating for 3-Phase operation and ½ of rated current for single phase operation. It also has an efficiency of 97.5% at rated amps, nominal line volts. For single phase operation, the drives output is significantly lowered to 50%.
This drive has embedded Six (6) Discrete Inputs, One (1) Form C Contacts, Two (2) Analog Input that accepts 0-10VDC 4-20mA signal types and Two (2) Analog output that transmits 0-10VDC and 0-20mA signal.
Install this drive to an IP20 / NEMA UL Type Open enclosure. Motor to drive ration must be minimum of 1:2 ratio while maximum is 2:1 ratio. This drive features Frequency control - speed regulation with slip compensation in V/Hz mode and Sensorless Vector mode. It may also be configured for Speed control - speed regulation with and without feedback.VIIIVThe 20AD3P4C3AYNANC0 is a PowerFlex 70 adjustable frequency AC drive. This drive has a Voltage Input rated 480VAC, 3-phase and output Voltage of 0-460VAC with rated Current of 3.4 A and Power of 1.5 kW (2.0 HP) with Human Interface Module (HIM).