Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 20BD011A3AYNAND0 is a PowerFlex 700 drive that is used to implement speed control of AC motors. This drive offers a current output of 11.0 amperes and power output of 7.5 Horsepower. Input power to the drive is 480VAC. This drive is included with an IGBT brake with filtered emission
This PowerFlex hardware is used to implement speed control. It is especially configured for Vector control which makes this drive compatible for use in applications where load changes are always present. It comes with an integral Human Interface Module (HIM) with full numeric keypad.
Install this drive to an IP20 / NEMA UL Type Open enclosure. Maintain an operating temperature of 0
40 °C (0
104 °F) this temperature range is applicable for a drive with top label. If top label is removed, the operating temperature range becomes 0
50 °C (0
122 °F). Mounting clearance shall also be followed. Top and bottom clearance shall be 101. 6 mm or 4.0 inches. If installed beside another PowerFlex drive, observe minimum spacing of 50.8 mm or 2.0 inches. Do not use spacers when installing this drive, it must be perfectly in contact with the mounting plate. This drive a Height measurement of 336.0mm (13.23 in.), Width of 110.0mm (4.33in) and Depth of 200.0 mm. (7.87 in.). It also has encoder interface option that is enabled only for Vector configured drives. The encoder feedback allows holding motor full load at zero speed. It has +/- 2% regulation.
This drive has Input and Output located the control terminals. These I/Os consist of Six (6) 115VAC Discrete Inputs with default setting of Stop - CF, Start, Auto/Man., Speed Sel 1, Speed Sel 2, and Speed Sel 3. Two (2) Form C Contacts with default setting of Faulted and Run status of the drive. Two (2) Analog Input that accepts 0-10VDC or 4-20mA signals with 11-Bit resolution for remote speed reference and Two (2) Analog Output that is able to transmit 0-10VDC or 4-20mA for speed feedback.
VIIIVThe 20BD011A3AYNAND0 is a PowerFlex 700 adjustable frequency AC drive. This drive has a Voltage Input rated 480VAC, 3-phase and output Voltage of 0-480VAC with rated Current of 11.0 A, Power of 7.5 HP with filtered emission and configured for Vector control.