Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 22A-A9P6N113 is a PowerFlex 4 with an input Voltage rating of 180 - 265 VAC, 1-Phase and Output current rating of 9.6 Amperes and Power of 2.2 kW or 3.0 HP.
This drive support seamless and premiere integration to Logix based controllers and intelligent devices such as the PowerFlex 4 drive. With this feature, it simplifies integration to control system and minimizes engineering tasks. It promotes Improved ease of usability, Reduced development time, simplified device mapping and configuration, Tag aliasing of specific drive register, Library of instructions, Application resources and enhanced productivity.
It is rated for IP 20 / NEMA / UL Type Open enclosure. This type of enclosure supports Two (2) mounting options. Mounting option A maintains top and bottom clearance of 120 mm (4.7 in). If another drive is installed beside this drive, no clearance is required. Mounting option B for the same panel rating requires a 25mm (1.0 in) between drives while top and bottom clearance are typical. For mounting option A, the minimum operating temperature is -10°C (14°F) and maximum of 40°C (104°F). For mounting option b, the minim temperature is typical and the maximum operating temperature is 50°C (122°F).
When powering up this drive, ensure that the internal capacitors are drained. Isolate the main supply first and discharge the capacitor for Three (3) minutes. Do not depend on the LED display as it may show a darkened display however, it does not mean that the drive capacitors are discharged.
It has a Fixed keypad that can be utilized for out of the box configuration. The keypad has a 4 digit display with additional 10 LED indicators. Remote handheld and Remote keypad are supported by this drive.
This drive has a built-in RS485 communication port which enables fast and easy integration to Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA) or Programmable Logic Controllers (PLC). Use Modbus RTU protocol to directly communicate and access drive parameters. Configurations may be sent and receive using this communication protocol. VIIIVThe 22A-A9P6N113 is a PowerFlex 4 drive with voltage Input rated 180-265 VAC, 1-phase and output rated Current of 9.6 A and Power of 2.2 kW (3.0 HP).