Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The Allen-Bradley 22A-B1P5N104 is an Allen-Bradley / Rockwell Automation product that belongs to the PowerFlex 4 Adjustable Frequency Drives product catalog. Primarily used for speed control of AC motors, this drive may also be used to implement basic motor control functionality such as Start / Stop / Jog, Local / Remote and Auto / Manual mode a motor.
This drive is supplied with a 3-Phase 240VAC input Voltage. This is to produce the designed output current of 1.5 A and power of 0.25 HP or 0.2KW and programmable output frequency of 0 to 240Hz.
The 22A-B1P5N104 is a panel mounted hardware. Install this electronic hardware to an enclosure that offers protection against entry of solid materials and splash of water. If installed with a fan that induces air inside to the enclosure, outside air shall not be of corrosive type nor contains explosive materials as the VFD generates a significant amount of heat. Also, temperature to be maintained inside the enclosure shall not be lower than -10 Deg. C and greater than 50 Deg. C. This drive is included with a fan. Depending on the installation location, install an appropriate climate control to maintain the drives required operating environment.
AC motors are typically used as final control element in a control system. Modulating its speed is performed to increase control efficiency and allow implementation of a more accurate control system. With the use of a PowerFlex 4, speed is modulated, and more complex modes of control is supported aside from the basic control of the AC Motor. VIIIVThe 22A-B1P5N104 is a PowerFlex 4 drive with voltage Input rated 240 VAC, 3-phase and output rated Current of 1.5 A and Power of 0.2 kW (0.25 HP).