Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
DH+ Communication and RS-232 Printer Port 10 in. Color Display with Keypad Panelview 1000. Comes with the mounting hardware, memory card holder, manual, paper cutout, and box shown. Used items may have some minor scratches or marks, but they have been tested are are in good working condition. If you need a specific revision, series, FRN or would like a picture of the unit please contact us prior to purchasing at sales@automationwebstore.com or 1-800-730-0292.
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 2711-K10C8 Human Machine Interface (HMI) provides real-time monitoring of the process or machine and user-friendly user interface intended for operating the system. This HMI device is typically installed in the machine level area of the plant.
The 2711-K10C8 belongs to the discontinued product line PanelView Standard Operator Terminal. It features a Sixteen (16) Function keys (F1 to F16) that is used by the operator for entering control command and data manipulations. Each of the buttons in the keypad assembly are rated for 1 Million presses. The colored HMI screen is capable of displaying color coded animations allowing easier understanding of the state of the system. The screen has a resolution of 640 x 480 pixels.
The industry approved Data Highway Plus (DH+) communication is capable of communication with PLC5, SLC500, MicroLogix and ControlLogix systems. For CompactLogix, use a communication adapter.
Additionally, the RS232 interface for printing is configured using the Configuration Mode Menu while the contents of the print is set-up within the PanelBuilder32 software.
This operator terminal uses a Cold Cathode Fluorescent (CCF) backlight with a half-life of 50,000 hr. 1/2 life at 25 °C (77 °F). It has rated power supply input range is 85-264VAC, with a frequency of 47-63 Hz.
The operator terminal measures 282 (H) x 423 (W) x 112 (D) mm or 11.11 (H) x 16.64 (W) x 4.40 (D) inches. It has an installation depth of 97 mm (3.81 in.), 129 mm (5.06 in.) with memory card retainer, 220 mm (8.65 in.) with memory card retainer and clearance to insert and remove memory card. Verify that the enclosure has a higher installation depth from what the operator terminal requires. Specifically, Two (2) inches clearance to allow proper air flow, hardware modifications and troubleshooting space. VIIIVThe 2711-K10C8 electronic hardware is a Human Machine interface (HMI) made by Allen Bradley. This is PanelView Standard Operator Terminal that is rated 85 to 264 VAC and features a 10.4-inch display, embedded keypad input area with built-in Data Highway Plus (DH+) communication port and RS232 printer interface.