Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
2711-K5A2 Panelview 550 DH-485 Communication Ports and comes with manual, mounting hardware, memory card holder, and box shown
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 2711-K5A2 is an operator terminal that is built with an integral keypad input mechanism, 5.5-inch monochrome screen and DH485 communication port. This device is powered by a 85 to 264VAC input source and pre-installed with a Random Access Memory (RAM) of 170KB and 240KB non-volatile memory. Non-volatile memory is expandable up to 32MB.
This particular product is a spare part material as the entire PanelView Standard Operator Terminal to which the 2711-K5A2 belongs is a discontinued product line. Discontinuation date of the product is 12/15/2014 with designated engineering replacement of 2711P-T6C20D.
PanelBuilder32 is the software used to develop custom applications for this terminal. Using the software, user interface and visualization screens is prepared offline. Internal tests may also be done to enable testing even without the actual hardware.
The Terminal also has an integral configuration mode menu where initial configurations such as screen brightness, RS232 transmission setting, alarm printer configurations may be set-up.
For industrially approved installation and maximize the units lifespan, install the hardware in a NEMA Type 12/13, 4X (Indoor use only), IP54 and IP65 or any equivalent rated enclosures. Create a panel cut-out according to the cut-out template shipped with the terminal and install the hardware flush mounted to the panel. It has internal circuit protection however, external protection devices may be installed such as surge suppressors, transformer, Uninterruptible Power Supply (UPS) and other devices.
VIIIVThe 2711-K5A2 electronic hardware is a Human Machine interface (HMI) made by Allen Bradley. This is PanelView Standard Operator Terminal that is rated 85 to 264 VAC and features a 5-inch display, embedded keypad input area with built-in dual DH485 communication port.