Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The Allen-Bradley 2711P-B15C4A2 is a spare-part item from the PanelView Plus Operator Terminal product family. This operator terminals enables control of machine or process via an integrated monitoring and control function. This operator terminal improves operator response and increase process operability.
This electronic hardware is a Human Machine Interface (HMI) that is installed to an enclosure with ratings IP54, IP65, NEMA Type 12/13 for outdoor application and 4X for indoor use. Maintain an operating temperature inside the panel within 0 to 55 °C (32 to 131 °F). Appropriate heating or cooling component must be installed to protect the electronic circuitry of this device. Consider the operator terminals Heat Dissipation rating of 240 BTU/h.
Install this HMI flush mounted to an enclosure following the provided cut-out template. Provide top clearance of 51 mm (2 in), bottom clearance of 51 mm (2 in) and side clearance of 25 mm (1 in). Following this clearance allows access to wiring areas, adequate workspace for troubleshooting and expansion and proper air-flow.
This operator terminal features a Touchscreen and Keypad interface rated for 1 million actuations and ideally operated with a gloved finger or stylus. The touch interface is capable of calibration through the configuration mode menu under display terminal settings.
It has a 15.0-inch colored graphic display, the largest among the PanelView Plus terminals. Screen brightness and contrast as well as temperature may be adjusted and monitored under display terminal settings also.
It also has an integrated Ethernet, DH485 and RS232 communication port. These ports are used for data exchange and supports simultaneous utilization depending on the supported communication of existing process controllers. Ethernet and DH485 supports multi-node communication while RS232 is capable of point-to-point communication. This HMI terminal has an internal memory of 128 MB Flash Memory and 128 MB Random Access Memory (RAM). Rated power supply input range for this device is 85 to 264VAC with frequency of 47 to 63 Hz.
VIIIVThe 2711P-B15C4A2 is a PanelView Plus 1500 Terminal from Allen-Bradley. It comes with a Touch and Keypad input area, 15.0-inch Colored display and Ethernet, DH485, RS232, USB communication ports.