Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 2711P-T12C6A2 is a Human Machine Interface (HMI) that belong to the 2711P PanelView Plus Operator Terminal. It specifically belongs to the sub-category of PanelView Plus 1250.
When installed outdoors, use a NEMA Type 12, 13, IP54 and IP65 rated enclosures. For indoor installation, use a NEMA 4X enclosure. Use the panel cutout template that ships with the device to create enclosure cutout. Specific cutout measurement 257 (10.11) for Height x 390 (15.35) for Width.
Proper spacing must be observed to promote adequate air flow as this HMI hardware dissipate heat rated at 240 BTU/hr. Maintain operating temperature at 0 to 55 °C (32 to 131 °F), operating vibration of 10
57 Hz, 0.012 pk-pk displacement 57 to 500 Hz, 2 g pk acceleration and operating shock 15 g at 11 ms.
This operator terminal may be used in large applications as it is equipped with 12.1-inch Colored screen which may be used to implement colored graphic displays and symbol rich process mimic to depict process state and conditions. An analog resistive touchscreen that is rated for 1 million actuations is used as operator input. The Random Access Memory and Flash memory that amount to 128MB each and nominal input DC supply of 24VDC.
This HMI hardware has multiple integrated communication ports. It has Data Highway Plus (DH+) and Remote I/O (RIO) ports, DH485 communication port for connecting to DH485 networks. These communication ports support legacy devices and may cover a wide length of cable. The Ethernet communication port is ideal for more modern devices particularly MicroLogix, CompactLogix and ControlLogix. It supports speed of 10 / 100Mbps with auto-negotiation. The RS232 communication port is designed for point-to-point communication in short distance. Typically, is used for within the panel communication. This terminal also support non-Rockwell Automation products.
FactoryTalk View Studio for Machine Edition is the development software for this operator terminal. It is a separately purchased software that serves as the common development tool for a wide range of PanelView products. It allows offline development, testing and debugging which save engineering and commissioning time. VIIIVThe 2711P-T12C6A2 is a PanelView Plus 1250 Terminal from Allen-Bradley. It comes with a Touchscreen input area and 12.1-inch Colored display.