Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1305-AA04A-DE is an adjustable AC Drive that features a microprocessor-based technology for implementing speed control of AC induction motors.
When connected to a 200-230 VAC 3-Phase power source, this adjustable frequency AC drive has the capability to provide output current of 4.5 A and 0.75kW or 1.0 HP of power. This drive may also be switched to German language, aside from the pre-loaded english language.
The base hardware configuration as indicated by the part number does not include a Human Interface Module (HIM). This component is an accessory component that is mounted to the drives front panel. It may be purchased and available in different configurations such as a HIM with potentiometer, HIM with keys and a programmer only HIM.
Even without a HIM, operation of the drive may still be implemented with the use of the embedded I/O which consists of Two (2) Programmable outputs, One (1) analog output, Eight (8) discrete inputs and One (1) analog output.
This drive is highly scalable as it supports installation of accessories that may be used for external protection of the drive such as Line Reactor, Reflected Wave Reduction Device and other protection devices; Communication adapters and modules to allow the drive accept parameters through the network; Dynamic break resistor to provide dynamic breaking capabilities.
When installed with a communication adapter, the drive is enabled with the capability of being controlled from a remote network even without the hardwired electrical signals. This method is used to directly access the drive register to edit operation parameters.
VIIIVThe 1305-AA04A-DE is an adjustable AC Drive with 3-Phase Voltage Input rated 200-230VAC, motor rating of 0.75 kW (1.0 HP) and output current of 4.5 A.