Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 20AB9P6A0AYNNNC0 is a PowerFlex 70 Adjustable frequency AC drives that features output Power Rating of 0.75 kW or 1.0 HP, output current of 9.6 amperes, output voltage of 0 to 220VAC and frequency of 0 to 500 Hz. Applicable Input Voltage for this drive is 0-240VAC, 3-Phase.
There are Six (6) Discrete Inputs, one (1) Discrete Output, two (2) Analog Input and Two (2) Analog Output installed within the I/O terminal of the drive. Additionally, a Potentiometer terminal is also provided intended for a Potentiometer with 1 to 10 k Ohm range.
The use of these embedded I/O is to allow wiring of external signaling devices to establish complete and integrated operation of the drive. The I/O channels are configurable to be given a specific parameter assignment. For instance, Digital Input 1 may be assigned to the Start command parameter and Input channel 1 shall be wired with a pushbutton device that signals Start of the drive. This way, the external signals coincide with the drive parameter thus enabling operation as far as the range of hardwired components.
Aside from Start, other assignable parameters to the input channels are Stop, Jog, Remote, Auto, Manual, Forward and Reverse rotation of the drive. Same principle goes with the analog input channel. Analog input accepts 0 to 10VDC or 4-20 mA signals which can be assigned as the drives frequency reference. Alternatively, the Potentiometer may also be the frequency reference and assigned with the same parameter as well. The Discrete output are dry contact output, Normally Open and Normally Closed. As dry contact outputs, 24VDC / 24VAC, 120VAC / 220VAC may be wired to this output channel. It may be configured to represent the drives status such as Fault and Run feedback. The Analog output channel produces 0-10VDC or 4-20mA signal which is typically used as speed feedback of the drive.
VIIIVThe 20AB9P6A0AYNNNC0 is a PowerFlex 70 adjustable frequency AC drive. This drive has a Voltage Input rated 240 VAC, 3-phase and output Voltage of 0-220VAC with rated Current of 9.6 A and Power of 2.2 kW (3.0 HP), unfiltered emission.