20BD014A0AYNANA0 PowerFlex 700

All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.

The 20BD014A0AYNANA0 is a Variable Frequency Drive (VFD) that is used to implement speed control of an AC motor. This part number belongs to the PowerFlex 700 adjustable frequency AC drives which may be used in a wide variety of applications. Aside from speed control, this drive is capable of implementing basic motor control requirements such as START / STOP, FORWARD / REVERSE, REMOTE /LOCAL, AUTO / MANUAL.

The drive’s input voltage is 480VAC, 3-phase. It has an output voltage of 0-480VAC with rated current of 14.0 A and power output of 10.0 horsepower. This drive has an integral IGBT brake with a filtered emission. It also comes with a user manual.

This adjustable frequency AC drive has integral protection installed in its Power circuitry. This protection includes ground fault protection, Electric motor overload, Removable MOV to ensure applicability even with systems without grounding installed and 6 kV transient protection. Aside from the built-in protection, it is recommended to install external protective components such as fuse, branch protection circuit component, line reactors, EMC filters and other appropriate components.

When wiring this drive, use a minimum wire size of 0.5 mm2 (22 AWG) and maximum of 4.0 mm2 (12 AWG) for input and power connections.

This drive has an I/O terminal block that houses the embedded I/O. The drive has Six (6) 24VAC / VDC Discrete Inputs, Two (2) Form C Contacts for Discrete Output, Four (4) Analog Input which consists of Two (2) analog input that accepts 4-20mA signals and Two (2) analog inputs that accepts +/- 10VDC. It also has Four (4) Analog Output made of Two (2) +/-10VDC and Two (2) 4-20mA outputs.

When wiring the I/O terminals, use a minimum wire size of 0.30 mm2 (22 AWG) and maximum of 2.5 mm2 (14 AWG). VIIIVThe 20BD014A0AYNANA0 is a Variable Frequency Drive (VFD) that is used to implement speed basic and advanced motor control requirements. This drive help eliminate complex wiring and save enclosure space as it comes with a programmable parameters and profile sets for its operation. Signals are wired to the terminals input and output terminals without the need to perform hardwire interlock. The drive’s parameters do the necessary interlocking.

This product is a PowerFlex 700 adjustable frequency AC drive that is definitely capable of implementing START / STOP, FORWARD / REVERSE, REMOTE /LOCAL, AUTO / MANUAL controls as well as advanced functions such as speed modulation, acceleration, deceleration, ramping, profile sets, protection settings, reaction to stop signal and many other parameters.

The drive’s input voltage is 480VAC, 3-phase. It has an output voltage of 0-480VAC with rated current of 14.0 A and power output of 10.0 horsepower. This drive has an integral IGBT brake with a filtered emission. It also comes with a user manual.

This drive has a built-in internal protection which includes includes ground fault protection, Electric motor overload, Removable MOV that is especially useful in ungrounded or poorly grounded systems. A user specified protection is also recommended for additional protection and to maximize the operation lifespan of the drive. This device may be fuse, branch protection circuit component, line reactors, EMC filters and other appropriate components.

Proper power and signal wiring is also important to implement. Use a minimum wire size of 0.5 mm2 (22 AWG) and maximum of 4.0 mm2 (12 AWG) for input and power connections while minimum wire size of 0.30 mm2 (22 AWG) and maximum of 2.5 mm2 (14 AWG) are recommended for I/O wiring.