20BD022A3AYNAND0 PowerFlex 700

All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.

The 20BD022A3AYNAND0 is an industrial electronic hardware that is primarily used for implementing AC motor control. Specifically, it is a programmable hardware that is capable of basic motor control and advanced functions such as speed control, vector control, speed ramping, acceleration and deceleration and many other functions.

For VFD selection, it is important to consider that the output current of this drive is 22.0 amperes along an output power of 15.0 Horsepower. Use this information to check with the Full Load Current (FLA) of the motor as indicated in the motor’s nameplate. Usually, the VFDs Current output is greater than the FLA of the motor around 1.5 times higher. Input power to the drive is a 3-Phase 480VAC which means this should be the available incomer in the plant. Similarly, the output voltage of this drive is 0-480VAC, 3-Phase which should much the voltage requirement of the motor as found in the motor nameplate.

This particular part number also depicts that this VFD is installed with a Human Interface Module (HIM) or universally known as keypad or configuration keypad. The purpose of this component is to simply configure and operate the drive locally through the embedded buttons. The disadvantage of this HIM is that the configuration must be done with the VFD panel always open to access the keypad. To allow configuration without opening the enclosure especially for panels with a disconnect switch, a remote mounted Him may be separately purchased. Optional HIMs such as a wireless HIM, remote Handheld HIM or a panel mounted HIM may be used.

This drive has Input and Output located the control terminals. It has Six (6) 115VAC Discrete Inputs Two (2) Form C Contacts, Two (2) Analog Input and Two (2) Analog Output.VIIIVThe 20BD022A3AYNAND0 is a PowerFlex 700 adjustable frequency AC drive. This drive has a Voltage Input rated 480VAC, 3-phase and output Voltage of 0-480VAC with rated Current of 15.0 A, Power of 22.0 HP with filtered emission, Human Interface Module (HIM), and configured for Vector control.