Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 20BD052A0AYNAND0 is a PowerFlex 700 Adjustable Frequency AC drive which sometimes referred to as variable Frequency Drive (VFD) or Variable Speed Drive (VSD). It is a compact hardware loaded with advanced and configurable features. It is scalable as it supports add-on devices for increased protection and enhancing the capability of the drive.
The primary intended use of this product is to perform speed control of a 3-Phase AC motor. It may be used with a single-phase system however, rated outputs are reduced to 50% and operation is not included in the UL certification.
The drives input voltage is 480VAC, 3-phase. It has an output voltage of 0-480VAC with rated current of 52.0 A and power output of 40.0 horsepower. It has an integral IGBT brake with a filtered emission. It also comes with a user manual. It is especially configured for Vector control for excellent torque and low speed performance.
This adjustable frequency AC drive has integral protection installed in its Power circuitry. This protection includes ground fault protection, Electric motor overload, Removable MOV to ensure applicability even with systems without grounding installed and 6 kV transient protection.
When wiring this drive, use a minimum wire size of 0.5 mm2 (22 AWG) and maximum of 4.0 mm2 (12 AWG) for input and power connections.
This drive has an I/O terminal block that houses the embedded I/O. The drive has Six (6) 115VAC Only Discrete Inputs configurable for START / STOP, LOCAL / REMOTE, AUTO / MANUAL commands or any other user specified function, Two (2) Form C Contacts for Discrete Outputs applicable for FAULT AND RUN feedback, Two (2) Analog Inputs capable of 0-10VDC or 4-20mA with 11-Bit resolution for SPEED REFERENCE, Two (2) Analog Outputs that transmits Voltage 0-10VDC or Current 4-20mA and potentiometer terminal that for a 2 to 10 k Ohm rated potentiometer with 2Watts power dissipation.
When wiring the I/O terminals, use a minimum wire size of 0.30 mm2 (22 AWG) and maximum of 2.5 mm2 (14 AWG). VIIIVThe 20BD052A0AYNAND0 is a PowerFlex 700 adjustable frequency AC drive. This drive has a Voltage Input rated 480VAC, 3-phase and output Voltage of 0-480VAC with rated Current of 52.0 A, Power of 40.0 HP with filtered emission and configured for Vector control.