Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 22A-D4P0H204 is an adjustable frequency drive under the PowerFlex 4 product catalog made by Allen-Bradley. PowerFlex 4 offers compact and cost-effective speed control solution for AC motors.
This drive has is designed for 3-Phase 480 VAC input voltage, 4.0 A current output and 2.0 HP or 1.5 kW power output. It has a built keypad for immediate configuration. All PowerFlex 4 drives has Five (5) 24VDC Sink / Source Discrete inputs, Two (2) individually isolated analog Inputs or 1 to 10k Ohm potentiometer and One Normally Open and Close contact with same common.
Multi-drive configuration is supported by this adjustable frequency AC drive. With multi-drive configuration, one or more drives may be connected in series connection utilizing the internal RS485 communication terminal. It follows the topology called daisy-chain where The Transmit wire (TX) is connected to the Receive (RX) terminal of the next drive. This pattern goes on up to the last drive with the final hardware terminated with the use of a terminating resistor. Terminating resistor consumes the voltage and closes the communication highway. Always connect the grounding wire to the designated ground terminal.
If other communication protocols are existing in the plant such as RS232, LonWorks, BacNet, ProfiBus, ControlNet and Ethernet, the drive may be installed with an appropriate communication adapter compatible to the mentioned protocols. These communication protocols follow a different topology dissimilar to RS485 and support either shorter or longer communication range. Specific cables must also be used such as Cat5 or Cat6, Profibus cable, ControlNet taps, Serial cables and other cables. VIIIVThe 22A-D4P0H204 is a PowerFlex 4 drive with voltage Input rated 480 VAC, 3-phase and output rated Current of 4.0 A and Power of 1.5 kW (2.0 HP).