Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The variable frequency drive with part number 22B-D012H204 belongs to the Bulletin 22B Power Flex 40 drives that is capable of sensorless vector control for low-speed torque control requirements. This drive has specific parameters such as 3-phase, 460 to 600 VAC input voltage rating and 460 to 600 VAC, 3-phase output voltage rating with Current of 12 Amperes and power of 5.5 Kilowatt or 7.5 Horsepower.
This adjustable frequency drive is shipped with an internal IGBT brake and circuit protections such as Ground fault protection Electronic motor overload, Removable MOV to ground and 6kV transient protection. Additional external protection may be installed such as line filters and signal conditioning may be installed.
This PowerFlex drive requires an operating temperature of 10 to 50 degrees C (14 to 122 degrees F), Operating shock of 15G peak for 11ms duration (±1.0ms) and Vibration of 1G peak, 5 to 2000 Hz. It has Voltage tolerances of 460 to 600Vand frequency tolerance range of 48
63 Hz. This drive must not be installed in locations where presence of volatile or corrosive gas, vapors or dust exists. If the drive is a spare unit, ensure that the storage location do contain the same corrosive and volatile gasses.
It has an integral RS485 communication port for implementing multi-drive communication however, communication adapters may still be added to extend the drives communication capabilities such as BACNet, Profibus, Ethernet, DeviceNet and other communication protocol.
It has embedded I/O such as Three (3) fixed inputs allocated for Start / Stop / Reverse inputs, Four (4) programmable inputs, Two (2) individually isolated Analog Input typically used as the speed reference, One (1) analog output and Discrete outputs such as opto-coupler and Form C contacts. Utilize this embedded I/O to implement a fully integrated VFD unit to higher control systems.
The terminal is configurable using the fixed keypad that comes with the unit or using DriveToolSP and Drive Explorer software.
VIIIVThe 22B-D012H204 is a PowerFlex 40 drive with 7.5 HP, 3-phase Input rated 480 VAC at 50/60 Hz, 3-Phase output rated 480VAC at 50/60 Hz.