Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 22B-D017H204 is an adjustable frequency drive from Allen-Bradley that belong to the PowerFlex 40 drives that supports Sensorless Vector Control. This drive is primarily used to implement speed regulation of AC motors with provision for installation of additional components. It offers a cost-effective solution and space saving design.
This adjustable frequency drive is capable of low-speed torque control requirements. The drive has rated input of 3-phase, 380 to 480 VAC input voltage rating and ouput Current of 17 Amperes and power of 7.5 Kilowatt or 10 Horsepower.
When working with this drive, remember that it is installed with high voltage capacitors that discharge in a short period after removal of main power supply. Should maintenance is needed or inspection is needed to be performed to the drive, isolate mains supply from line inputs [R, S, T (L1, L2, L3)]. Allow a minimum of Three minutes for discharging of capacitor to safe voltage levels. Blank display LED do not indicate capacitor charge.
Install the drive using a replacement drive plate into an enclosure that is IP20, NEMA/UL Type Open as depicted by the drives part number. Maintain an operating temperature of 10 to 50 degrees C (14 to 122 degrees F), Operating shock of 15G peak for 11ms duration (±1.0ms) and Vibration of 1G peak, 5 to 2000 Hz. This drive must not be installed in locations where volatile or corrosive gas, vapors or dust are present. If the drive is a spare unit, ensure that the storage location do contain the same corrosive and volatile gasses.
This drive has embedded I/O channels such as Discrete inputs that can be in sink / source configuration, an analog input with signal types of 0 to 10 VDC and 4 to 20 mA, typically used as speed reference, an analog output supporting the same signal types as the analog input however, this analog output may be used as speed feedback for indicators, loop controllers and Proportional-Integral and Derivative controllers. Finally, output channels that can be used to report the drives state.
The RS485 support multi-drop configuration when in MODBUS RTU mode. The drive also supports communication enhancement with the additiontion of communication adapters such as BACNet, Profibus, Ethernet, DeviceNet and other communication protocol.
The terminal is configurable using the fixed keypad that comes with the unit or using DriveToolSP and Drive Explorer software.
VIIIVThe 22B-D017H204 is a PowerFlex 40 drive with 10 HP, 3-phase Input rated 480 VAC at 50/60 Hz, 3-Phase output rated 480VAC at 50/60 Hz.