Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The PanelView 550 2711-B5A12L1 is a Profibus PanelView Standard Operator Terminal. This product is a product declared discontinued on 10/01/2006.
This operator terminal functions as a Human Machine Interface (HMI) that carries certification from UL, cUL/CSA and CE certifications and approved for use in Class 1 Division II process locations.
This rugged electronic component has a physical dimension of 167 (H) x 266 (W) x 106 (D)
6.57 (H) x 10.47 (W) x 4.17 (D) and installation depth of 86 mm (3.39 in.), 118 mm (4.64 in.) with memory card retainer, 207 mm (8.15 in.) with memory card retainer and clearance to insert and remove memory card. These measurements are essential to properly installing the device to a NEMA Type 12/13, 4X (Indoor use only), IP54, IP65 enclosure.
This HMI terminal is equipped with LED indicators for self-diagnosis of Communication status (COMM) and Hardware fault. These diagnostic status may also be seen in the HMI screen through the pop-up alarm banner with more details provided.
The operator terminal has an embedded HMI monochrome screen which has a diagonal measure of 5.5-inch display with a resolution of 256 x 128 pixels and display area of 120 x 60 mm (4.75 x 2.38 in.). The screen is an LCD blue mode display installed with a replaceable backlight that may be operated up to 100,000 hrs.
The operator terminal is enables real-time interaction through the Touch and Keypad input that are both designed for 1 million actuations. To maximize operation of these input interfaces, it is recommended to use a gloved finger for keypad or touch interaction and a rounded pointer or stylus with radius of 1 mm (0.040 in).
built-in Profibus communication port enables communication with partner controllers, converters and gateways through daisy-chain topology. One advantage of Profibus is the capability of implementing high-integrity and high-speed communication over long distances with a minimum of 1KM cable length. The secondary port RS232 is used for sending print queues to any IMB enhanced character set alarm printer for printing alarm list and messages.
VIIIVThe 2711-B5A12L1 electronic hardware is a Human Machine interface (HMI) made by Allen Bradley. This is PanelView Standard Operator Terminal that is rated 18 to 32VDC, 5-inch display, embedded keypad and Touch input area with Profibus communication port and RS232 printer port.