Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
The 2711-B5A20 Panelview 550 has EtherNet/IP Communication and RS-232 Printer Port and comes with manual, mounting hardware, memory card holder, and box shown. The 2711-B5A20 is a Panelview 550 HMI with Ethernet and RS-232 communication ports. This unit enables the user to input data and commands via both the Keypad and Touchscreen. This unit comes with a 5.5 in. Monochrome display, which has an internal backlight in all Series H units and an external halogen or LED(if replaced) in all earlier series (Ser A-Ser G). This unit will have a FRN (Firmware) between 1.00 and 4.48, the most common firmware are FRN 4.20, FRN 4.41, and FRN 4.46. Customers can load their program onto the unit in .PVA format using Panelbuilder 32 software or a memory card that can be installed on the back of the unit. This Allen Bradley PV 550 can be installed quickly simply by removing the defective unit and sliding this one into the same enclosure and tightening the mounting nuts onto the threaded mounting studs. The AB 2711-B5A20 is obsolete/discontinued, but we continue to supply used units that are tested and come with our 1 Year Automation Webstore warranty.
The Allen Bradley Panelview 550 series can also be repaired, and we offer a full in house repair service and all of our repairs come with our 1 Year Automation Webstore warranty. To get a repair quote the 2711-B5A20 simply give us a call and we will provide you with a quote/rma.
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 2711-B5A20 Human Machine Interface (HMI) provides operator and machine or process workspace in the machine level area of an industry. It allows real-time interaction and updated display of process data and information that provides an accurate reference for proper operator response and decision making.
It is a PanelView 550 that belongs to the Bulletin 2711 PanelView Standard Operator Terminal product family. Human Machine Interface (HMI) are also known as Operator Interface Terminal (OIT) or Man Machine Interface (MMI).
For industrially approved installation and maximize the units lifespan, install the hardware in a NEMA Type 12/13, 4X (Indoor use only), IP54 and IP65 or any equivalent rated enclosures. Create a panel cut-out according to the cut-out template shipped with the terminal and install the hardware flush mounted to the panel. It has internal circuit protection however, external protection devices may be installed such as surge suppressors, transformer, Uninterruptible Power Supply (UPS) and other devices.
Provide adequate space within the enclosure for ventilation. The PanelView device and other components heat dissipation must be considered. The ideal ambient temperature surrounding the terminal must be between 0
55 °C (32
131 °F). Maintain spaces for provision to access the back panel of the terminal for wiring, maintenance, installing a memory card and troubleshooting.
The terminal has a 5.5-inch display with a resolution of 256 x 128. And display area of 120 x 60 mm (4.75 x 2.38 in.). It is operated using the embedded keypad or touch input area. Both input mechanism allows interaction to process and designed to withstand 1 million actuations.
The terminal supports alarm printing through its RS232 printer port. User may print alarm records, alarm description, time-stamp and acknowledgement status for better analysis of the system.
The 2711-B5A20 rated power supply input range is 85-264V AC, with a frequency of 47-63 Hz. The terminal Monochrome has LCD blue mode display with a backlight life of 100,000 hr.
VIIIVThe 2711-B5A20 electronic hardware is a Human Machine interface (HMI) made by Allen Bradley. This is PanelView Standard Operator Terminal that is rated 85 to 264 VAC and features a 5-inch display, embedded keypad and Touch input area with Ethernet and RS232 communication port.