1761-L32BWA MicroLogix

All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.

Specifications for this hardware include an operating temperature between 0 and 55 degrees Celsius for horizontal mounting and 0 to 40 degrees Celsius for vertical mounting. Storage temperature is between -40 and 85 degrees Celsius and this hardware’s operating humidity is between 5 and 95% (non-condensing). General specifications for this controller include 1 K of EEPROM memory and a 50,000 power cycle minimum. Terminal screw torque is 0.9 Newton-Meters (maximum) and the electrostatic discharge rating is EN 61000-2 at 8,000 Volts. This controller has an isolation voltage of 1,500 Volts AC. Analog input specifications for the hardware include a voltage input range between -10.5 and 10.5 Volts DC and a current input range between -21 and 21 MilliAmps. Data type with regard to analog input is 16-bit signed integer and non-linearity is 0.002%. Analog output specifications include a voltage output range between 0 and 10 Volts DC and a current output range between 4 and 20 MilliAmps. Data type with regard to analog output is 16-bit signed integer and non-linearity is 0.02%. Step response for this hardware is 2.5 milliseconds at 95% and both voltage and current miswiring can withstand short circuit.

For installation of this hardware onto a DIN rail, the manufacturer recommends a series of steps to follow for proper installation: first, mount the DIN rail ensuring that the required amount of space is left for the controller to be mounted. Next, place the top slot on the controller over the DIN rail. Once this is complete, snap the controller into its proper position while pressing the hardware against the DIN rail. It should be noted that the protective wrapping should be left on the device until the installer has finished the installation process.VIIIV
The 1761-L32BWA by Allen-Bradley and Rockwell Automation is a Programmable Logic Controller and belongs to the MicroLogix 1000-Series. It has 32 digital I/O and a 24 Volt DC input type. This hardware has a relay output type and a 120/240 Volt AC power supply.