Loading... Please wait...
- Home
- Allen Bradley Drives
- Powerflex 4
- 22A-D1P4N104 PowerFlex 4
Related Products
-
22B-D1P4N104 Powerflex 40 $1,289.00
-
22A-A2P3N114 PowerFlex 4 $1,197.00
-
22A-B012H204 PowerFlex 4 $850.00
-
22A-D2P3N104 PowerFlex 4 $970.00
-
22A-D6P0N104 PowerFlex 4 $2,518.00
22A-D1P4N104 PowerFlex 4
Hover over image to zoom
Allen Bradley
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Refurbished Products
FedEx, UPS, and DHL
Product Description
Warranty Information
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
Product Overview
The 22A-D1P4N104 is a PowerFlex 4 Drive that features output current of 1.4 A, power of 0.4 HP or 0.5 KW. The drives input is 3-Phase 480 VAC. This hardware supports panel mounting in enclosure rated IP20 / NEMA UL Type Open.
This PowerFlex 4 drive has integrated Five (5) Discrete inputs, 3 of which have fixed assignments for START/STOP/REV and 2 fully programmable for custom defined inputs such as Local Control, Preset Frequencies, Jog, RS485 Control, Second Accel / Decel, Auxilliary Fault and Clear Fault. The programmable input is configured with the drive parameters accessible in the integrated Human Interface Module (HIM). It also has Two (2) Analog Inputs that accepts signals in the form of 0 to 10 V and 4 to 20mA signals. These inputs are isolated from each other. One (1) set of Form C outputs, Normally Open and Normally Closed is also available for that may be used as the drives feedback status. When wiring the I/O, it is recommended to always use a copper wire with insulation rating of 600V or greater. Control and signal wires must be separated by at least 0.3 meters or 1 foot from the power cables.
For computer-based control systems such as such as Human Machine Interface (HMI) or Supervisory Control and Data Acquisition (SCADA) or any custom 3rd party systems, the drive parameters are accessible by default using the RS485 terminal. Up to 31 PowerFlex drives devices may be connected in One (1) RS485 segment in RTU mode.
The drive may also be configured offline using DriveExplorer, DriveTools SP while dynamic configuration is supported by Connected Components Workbench (CCW) and Studio 5000 Logix Designer. Using CCW and Studio 500, the drive may be operated with changing parameters through pre-defined program sets stored in the program.
VIIIVThe 22A-D1P4N104 is a PowerFlex 4 drive with voltage Input rated 480 VAC, 3-phase and output rated Current of 1.4 A and Power of 0.4 kW (0.5 HP).