Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
Specifications on this device include an operating temperature between 0 and 55 degrees Celsius for horizontal mounting and 0 to 40 degrees Celsius for vertical mounting. Storage temperature for this device is between -40 and 85 degrees Celsius and its operating humidity is between 5 and 95% (non-condensing). General specifications for the 1761-L20BWB-5A include 1K of EEPROM memory and a power cycle minimum of 50,000. Terminal screw torque for this controller is 0.9 Newton-Meters (maximum). The electrostatic discharge rating for this device is EN 61000-2 at 8,000 Volts. This controller has an isolation voltage of 1,500 Volts AC. Analog input specifications for the MicroLogix 1000 Controller include a voltage input range between -10.5 and 10.5 Volts DC and a current input range between -21 and 21 MilliAmps. The data type (with regard to analog input) for this device is 16-bit signed integer. Non-linearity is 0.002% and input to output isolation is 30 Volt rated working/500 Volt isolation. Analog output specifications include a voltage output range between 0 and 10 Volts DC and a current output range between 4 and 20 MilliAmps. Data type with regard to analog output is 16-bit signed integer and non-linearity is 0.02%. Step response is 2.5 milliseconds at 95%. Both voltage and current output miswiring can withstand short circuit.
To ensure proper mounting of the device onto a DIN rail, first you must mount the DIN rail itself. While doing this, it is recommended by the manufacturer that you leave enough room for the device to meet the required spacing requirements. Next, place the top slot on the device onto the DIN rail. Once this is completed, snap the 1761-L20BWB-5A into position onto the rail. When mounting this controller onto a DIN rail, the manufacturer recommends that you leave the controller’s protective wrapping on until the installation is complete.VIIIVThe 1761-L20BWB-5A is a Programmable Logic Controller made by Allen-Bradley and Rockwell Automation. It has 20 digital I/O and a 24 Volt DC input type. This controller has a relay output type and a 24 Volt DC power supply. This MicroLogix 1000 Controller has 5 analog I/O.