Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The PowerFlex 40 drive with part number 22B-D012N204 is an adjustable frequency drive from Allen-Bradley that offers a cost effective solution in implementing speed modulation of motors including sensorless vector application.
This PowerFlex drive meets low-speed torque control requirements with specific parameters such as a 3-phase, 460 to 600 VAC input voltage rating and 460 to 600 VAC, 3-phase output voltage rating with Current of 12 Amperes and power of 5.5 Kilowatt or 7.5 Horsepower.
It is operated in environment where temperature is within 10 to 50 degrees C (14 to 122 degrees F), Operating shock of 15G peak for 11ms duration (±1.0ms) and Vibration of 1G peak, 5 to 2000 Hz. It has Voltage tolerances of 460 to 600Vand frequency tolerance range of 48
63 Hz. This drive must not be installed in locations where presence of volatile or corrosive gas, vapors or dust exists. If the drive is a spare unit, ensure that the storage location do contain the same corrosive and volatile gasses.
This drive has embedded I/O channels such as Discrete inputs that can be in sink / source configuration, an analog input with signal types of 0 to 10 VDC and 4 to 20 mA, typically used as speed reference, an analog output supporting the same signal types as the analog input however, this analog output may be used as speed feedback for indicators, loop controllers and Proportional-Integral and Derivative controllers. Finally, output channels that can be used to report the drives state. Utilizing this output enables a fully automated unit, ready for use in simple and complex control strategies such as Feedforward, Cascade, Ratio, Auctioneering, Split Range and other control systems.
It has an integral RS485 communication port for implementing multi-drive communication however, communication adapters may still be added to extend the drives communication capabilities such as BACNet, Profibus, Ethernet, DeviceNet and other communication protocol.
The terminal is configurable using the fixed keypad that comes with the unit or using DriveToolSP and Drive Explorer software.
VIIIVThe 22B-D012N204 is a PowerFlex 40 drive with 7.5 HP, 3-phase Input rated 480 VAC at 50/60 Hz, 3-Phase output rated 480VAC at 50/60 Hz.