Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 2711P-RP6 is a CE logic module for PanelView Plus CE terminals. This module has an integrated 128 MB Flash Memory and 128 MB for Random Access Memory. This module has a built-in compatibility with FactoryTalk ViewPoint software that allows viewing of the operator terminal in read-only mode with the use of a standard web browser.
Viewpoint software may run in Series E Operator terminals or later. It requires a minimum memory of 128 MB. Alternatively, installing a CompactFlash card with FactoryTalk View Studio to a PanelView 700-1500 terminal will enable the same functionality. FactoryTalk ViewPoint is an integral part of FactoryTalk View Studio.
The 2711P-RP6 is found at the back of the operator terminal. It features One (1) Ethernet Communication Port, One (1) Serial communication terminal and Two (2) USB ports. 24VDC Power supply is used to energize this module including the entire PanelView terminal. This module has a Power Dissipation of 70W.
The logic module is attached to a specific slot of the operator terminal. It may only be used with PanelView Plus CE operator terminals. When working with the logic modules, whether it is replacement or new installation, always prevent electrostatic discharge (ESD) by touching a grounded object or wearing a ground strap. Never attempt to replace or open the module under power as this may create electrical arcs that may damage the module, the PanelView or both the device. If a communication module is attached, remove first the communication module to be followed by the logic module. To re-assemble the unit, install the modules in reverse order.VIIIVThe 2711P-RP1 is a logic module for PanelView Plus / PanelView Plus CE. It is an add-on module with Non-Volatile internal 32 MB Flash Memory and 64 MB Random Access Memory (RAM).