Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-IF2OF2 by Allen-Bradley and Rockwell Automation is an expansion I/O module and is part of the MicroLogix 1200 series. This hardware has 2 differential unipolar inputs and 2 single-ended unipolar outputs. Input specifications for the 1762-IF2OF2 include a typical update time of 2.5 milliseconds and a successive approximation A/D converter type. Output specifications include a typical update time of 4.5 milliseconds and a resistor string D/A converter type. This hardware has continuous open and short-circuit protection and heat dissipation of 2.6 Watts. General specifications include an approximate shipping weight of 240 grams (0.53 pounds) and a maximum bus current draw of 40 milliAmps at 5 Volts DC and 105 milliAmps at 24 Volts DC. Analog normal operating range for voltage is 0 to 10 Volts DC and 4 to 20 milliAmps for current. Full scale analog ranges are 0 to 10.5 Volts DC for voltage and 0 to 21 milliAmps for current. This module has a 12-bit unipolar resolution. The dimensions for the 1762-IF2OF2 are 90 millimeters for height, 87 millimeters for depth, and 40 millimeters for width. Storage temperature for the 1762-IF2OF2 is between -40 and 85 degrees Celsius and operating temperature is between -20 and 65 degrees Celsius. Operating humidity is 5 to 95% (non-condensing) and operating shock is 30G. This device is C-UL certified, UL 508 listed, CE compliant for all applicable directives, and C-Tick marked for all applicable acts. Radiated and conducted emissions has a rating of EN50081-2 Class A.
To mount the 1762-IF2OF2 onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must make sure that the DIN latch is closed. After this, it is time to hook the top slot over the DIN rail. While pressing the module down against the top of the rail, secure the bottom of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-IF2OF2 can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails.
VIIIVThe 1762-IF2OF2 by Allen-Bradley and Rockwell Automation is an expansion I/P module and is part of the MicroLogix 1200 Series. This module has 2 differential unipolar inputs and 2 single-ended unipolar outputs.