Loading... Please wait...
- Home
- Allen Bradley PLC
- MicroLogix 1200
- 1762-IR4 MicroLogix
Related Products
-
1762-IQ8 MicroLogix $318.00
-
1762-L24BXBR MicroLogix $3,731.00
-
1762-L40AWAR MicroLogix $2,843.00
-
1762-OA8 MicroLogix $215.00
-
1762-OB8 MicroLogix $401.00
1762-IR4 MicroLogix
Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Refurbished Products
FedEx, UPS, and DHL
Product Description
Type a description for this product here...
Warranty Information
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
Product Overview
The 1762-IR4 by Allen-Bradley and Rockwell Automation is an RTD/Resistance Input Module. It is part of the MicroLogix 1200 Series. Input specifications for this hardware include 4 inputs and a Delta-Sigma A/D converter type. This module has input filter and configuration dependent typical update time. General specifications for the 1762-IR4 include an approximate shipping weight of 260 grams, or 0.57 pounds. Maximum bus current draw is 40 milliAmps at 5 Volts DC and 50 milliAmps at 24 Volts DC. It has an input filter and configuration dependent resolution and 30 Volt AC/30 Volt DC working voltage. Heat dissipation for this hardware is 1.5 total Watts. With regard to calibration, autocalibration is performed on the module while on channel enable as well as on a configuration change between channels; you can also program the module to calibrate every five minutes. Dimensions for the 1762-IR4 are 90 millimeters in height, 87 millimeters in depth, and 40 millimeters in width.
To mount the 1762-IR4 onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must ensure that the DIN latch is closed. After this, it is time to hook the top slot on the module over the DIN rail. While pressing down on the module against the top of the rail, secure the bottom part of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-IR4 can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. VIIIVThe 1762-IR4 by Allen-Bradley and Rockwell Automation is an RTD/Resistance Input Module. This hardware is part of the MicroLogix 1200 Series. It has 4 inputs and an input filter and configuration dependent resolution.