Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-OA8 is an 8-Point 120/240 Volt AC Triac Output Module by Allen-Bradley and Rockwell Automation. It is part of the MicroLogix 1200 Series of controllers. The voltage category for this module is 100 to 240 Volts AC and it has an operating voltage range between 85 and 265 Volts AC at 47 to 63 Hertz. This hardware has 8 outputs and a maximum heat dissipation of 2.9 total Watts. Number of commons for this module is 2 and it has a maximum bus current draw of 115 milliAmps at 5 Volts DC (0.575 Watts). Maximum off-state leakage at 132 Volts is 2 milliAmps and 2.5 milliAmps at 265 Volts. Minimum on-state current is 10 milliAmps and maximum on-state voltage drop is 1.5 Volts @ 0.5 Amps. This product has a maximum surge current of 5.0 Amps.
To mount the 1762-OA8 onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must ensure that the DIN latch is closed. After this, it is time to hook the top slot on the module over the DIN rail. While pressing down on the module against the top of the rail, secure the bottom part of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-OA8 can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver in the DIN rail latch at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-OA8 by Allen-Bradley and Rockwell Automation is an 8-Point 120/240 Volt AC Triac Output Module. It is part of the MicroLogix 1200 Series of controllers. This module has a voltage category of 100-240 Volts AC and has 8 outputs.