Hover over image to zoom
Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-L24BXBR by Allen-Bradley and Rockwell Automation is a MicroLogix 1200 Programmable Controller. It has an input power of 24 Volts DC and 10 24-Volt DC inputs with 4 fast 24-Volt DC inputs. This controller has 5 relay outputs, 4 24-Volt DC FET outputs, and 1 high-speed 24-Volt DC FET output. Input specifications for the 1762-L24BXBR include an on-state voltage range of 14 to 26.4 Volts DC at 55 degrees Celsius and 14 to 30 Volts DC at 30 degrees Celsius for inputs 0 through 3. For inputs 4 and higher, on-state voltage range is 10 to 26.4 Volts DC at 55 degrees Celsius and 10 to 30 Volts DC at 30 degrees Celsius. Off-state voltage range is 0 to 5 Volts DC and maximum off-state leakage current is 1.5 milliAmps (minimum). For inputs 0 through 3, operating frequency is 0 Hertz to 20 kiloHertz and 0 Hertz to 1 kiloHertz for inputs 4 and higher. Maximum load current limit at 5 Volts DC is 400 milliAmps and 350 milliAmps at 24 Volts DC.
To mount the 1762-L24BXBR onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must ensure that the DIN latch is closed. After this, it is time to hook the top slot on the module over the DIN rail. While pressing down on the module against the top of the rail, secure the bottom part of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-L24BXBR can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver in the DIN rail latch at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-L24BXBR by Allen-Bradley and Rockwell Automation is a MicroLogix 1200 Programmable Controller. It has an input power of 24 Volts DC and 10 24-Volt DC inputs with 4 fast 24-Volt DC inputs. This hardware has 5 relay outputs, 4 24-Volt DC FET outputs, and 1 high-speed 24-Volt DC FET output.