1762-L40AWA MicroLogix

All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.

The 1762-L40AWA by Allen-Bradley and Rockwell Automation is a MicroLogix 1200 Programmable Controller. This hardware has an input power of 120/240 Volts DC. The 1762-L40AWA has 24 120-Volt AC inputs and 16 relay outputs. Input specifications for this hardware include an on-state voltage range of 79-132 Volts AC and an off-state voltage rating of 0-20 Volts AC. Operating frequency for the 1762-L40AWA is 47-63 Hertz. On-state current minimum for this controller is 5.0 milliAmps at 79 Volts AC and its nominal on-state current is 12 milliAmps at 120 Volts AC; maximum on-state current is 16.0 milliAmps at 132 Volts AC. Additional input specifications for this controller include an off-state leakage current of 2.5 milliAmps (maximum) and a maximum inrush current at 120 Volts AC of 250 milliAmps.

To mount the 1762-L40AWA onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must ensure that the DIN latch is closed. After this, it is time to hook the top slot on the module over the DIN rail. While pressing down on the module against the top of the rail, secure the bottom part of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-L40AWA can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver in the DIN rail latch at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-L40AWA is a MicroLogix 1200 Programmable Controller by Allen-Bradley and Rockwell Automation. It has an input power of 120/240 Volts AC and 24 120-Volt AC inputs; this hardware has 16 relay outputs.