Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-L40BXB is a MicroLogix 1200 Series Programmable Controller by Allen-Bradley and Rockwell Automation. It has an input power of 24 Volts DC and a total of 24 inputs (20 24-Volt DC, 4 Fast 24 Volt DC). This controller has 8 relay outputs, 7 24-Volt DC FET outputs, and 1 high-speed 24 Volt DC FET output for a total of 16 outputs. The input voltage range for this hardware is 85 to 265 Volts AC at 47 to 63 Hertz. On-state voltage range for inputs 0 through 3 is 14 to 26.4 Volts DC at 55 degrees Celsius and 14 to 30 Volts DC at 30 degrees Celsius; for inputs 4 and higher, on-state voltage range is 10 to 26.4 Volts DC at 55 degrees Celsius and 10 to 30 Volts DC at 30 degrees Celsius. The 1762-L40BXB has an off-state voltage range of 0 to 5 Volts DC. Operating frequency for inputs 0 through 3 is 0 Hertz to 20 kiloHertz and 0 Hertz to 1 kiloHertz for inputs 4 and higher. The maximum off-state leakage current is 1.5 milliAmps (minimum). This controller has a maximum load current limit of 600 milliAmps at 5 Volts and 500 milliAmps at 24 Volts.
To mount the 1762-L40BXB onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next you must ensure that the DIN latch is closed. After this, it is time to hook the top slot on the module over the DIN rail. While pressing down on the module against the top of the rail, secure the bottom part of the module into position. It is recommended that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-L40BXB can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver in the DIN rail latch at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-L40BXB by Allen-Bradley and Rockwell Automation is a MicroLogix 1200 Series Programmable Controller. This hardware has an input power of 24 Volts DC. The 1762-L40BXB has 20 24-Volt DC inputs and 4 Fast 24-Volt DC inputs for a total of 24 inputs. This controller also has 8 relay outputs, 7 24-Volt DC FET outputs, and 1 high-speed 24 Volt DC FET output for a total of 16 outputs.