Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-OB8 by Allen-Bradley and Rockwell Automation is a MicroLogix Solid-State 24 Volt DC Source Output Module. It is part of the MicroLogix 1200 Series of controllers by Allen-Bradley. This controller has 8 outputs and a 24 Volt DC voltage category. Operating voltage range for this device is between 20.4 and 26.4 Volts DC. The maximum bus current draw for the 1762-OB8 is 115 milliAmps at 5 Volts DC. Maximum heat dissipation is 1.61 total Watts and maximum off-state leakage is 1.0 milliAmp. Minimum on-state current is 1.0 milliAmp and maximum on-state voltage drop is 1.0 Volt DC. The maximum surge current for the 1762-OB8 is 2.0 Amps, and repeatability is once every 2 seconds for a duration of 10 milliseconds. This hardware has a power supply distance rating of 6. Dimensions for the 1762-OB8 are 90 x 40.4 x 87 millimeters, or 3.54 x 1.59 x 3.43 inches. Its approximate shipping weight is 210 grams, or 0.46 pounds.
To mount the 1762-OB8 onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next it is important to make sure that the DIN latch is closed. After this, it is time to hook the top slot on the module on the DIN rail. While pressing down on the module along the top of the rail, secure the bottom part of the module into position. It is important that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-OB8 can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver inside the DIN rail latch, located at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-OB8 by Allen-Bradley and Rockwell Automation is a MicroLogix Solid-State 24 Volt DC Source Output Module. It is part of the MicroLogix 1200 Series of controllers by Allen-Bradley. This hardware has 8 outputs and a 24 Volt DC voltage category.