Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-OW8 by Allen-Bradley and Rockwell Automation is a MicroLogix 1200 Series Relay Output Module. It has 8 outputs and an AC/DC normally open relay voltage category. This controller has a power supply distance rating of 6. General specifications for this device include an approximate shipping weight of 228 grams, or 0.50 pounds. The dimensions for the 1762-OW8 are 90 x 40 x 87 millimeters, or 3.543 x 1.5753 x 3.425 inches. Operating temperature is between 0 and 55 degrees Celsius and non-operating temperature is between -40 and 85 degrees Celsius. With regard to output specifications, the 1762-OW8 has an operating voltage range of 5 to 265 Volts AC and 5 to 125 Volts DC. The maximum bus current draw is 80 milliAmps at 5 Volts DC and 90 milliAmps at 24 Volts DC. This hardware has a maximum heat dissipation of 2.9 total Watts. Maximum off-state leakage is 0 milliAmps and minimum on-state current is 10 milliAmps at 5 Volts DC.
To mount the 1762-OW8 onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next it is important to make sure that the DIN latch is closed. After this, it is time to hook the top slot on the module on the DIN rail. While pressing down on the module along the top of the rail, secure the bottom part of the module into position. It is important that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-OW8 can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver inside the DIN rail latch, located at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-OW8 is a MicroLogix 1200 Series Relay Output Module by Allen-Bradley and Rockwell Automation. It has 8 outputs and an AC/DC normally open relay voltage category. This hardware has a power supply distance rating of 6.