Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762-OX6I is a MicroLogix 1200 Series Isolated Relay Output Module by Allen-Bradley and Rockwell Automation. It has 6 outputs and an AC/DC Type C relay voltage category. This controller has a power supply distance rating of 6. General specifications for the 1762-OX6I include an approximate shipping weight of 220 grams, or 0.485 pounds. It’s dimensions are 90 x 40 x 87 millimeters, or 3.54 x 1.58 x 3.43 inches. Operating temperature is between 0 and 55 degrees Celsius and non-operating temperature is between -40 and 85 degrees Celsius. Operating humidity is 5% to 95%, non-condensing. Output specifications for the 1762-OX6I include a maximum bus current draw of 110 milliAmps at 5 Volts DC and 110 milliAmps at 24 Volts DC; heat dissipation is 2.8 Watts. This hardware has an off-state leakage current of 0 milliAmps and an on-state current of 100 milliAmps at 5 Volts DC. The continuous current per point is 7 Amps (maximum).
To mount the 1762-OX6I onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next it is important to make sure that the DIN latch is closed. After this, it is time to hook the top slot on the module on the DIN rail. While pressing down on the module along the top of the rail, secure the bottom part of the module into position. It is important that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762-OX6I can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver inside the DIN rail latch, located at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762-OX6I is a MicroLogix 1200 Series Isolated Relay Output Module by Allen-Bradley and Rockwell Automation. It has 6 outputs and an AC/DC Type C relay voltage category. This hardware has a power supply distance rating of 6.