Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
Type a description for this product here...
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 1762sc-IF8U is a MicroLogix 1200 Series 8-Channel Universal Analog Input Module by Allen-Bradley and Spectrum Controls. It has 8 V, C, or TC inputs and has a 16-bit resolution. The continuous electrical isolation for this hardware is 10 Volts DC (channel-to-channel isolation) and 125 Volts AC (continuous). Advanced features on this device include 4 filter frequencies, which are individually selectable by channel. Input impedance is 249 ohm (current) and input overvoltage protection is ±28 Volts DC continuous. The input overcurrent protection on the 1762sc-IF8U is 42 milliAmps continuous and it has a required backplane current of 175 milliAmps at 5 Volts (maximum) and 21 milliAmps at 24 Volts (maximum). Thermal dissipation for this controller is 1.40 Watts, maximum. Environmental specifications include an operational temperature between -20 and 60 degrees Celsius and a storage temperature between -40 and 85 degrees Celsius; relative humidity is 5% to 95% (non-condensing).
To mount the 1762sc-IF8U onto a DIN rail, first you must mount your DIN rail, ensuring that the placement of the module on the DIN rail meets the required amount of spacing. Next it is important to make sure that the DIN latch is closed. After this, it is time to hook the top slot on the module on the DIN rail. While pressing down on the module along the top of the rail, secure the bottom part of the module into position. It is important that the installer leave the protective wrapping on the module until the wiring process is complete. The 1762sc-IF8U can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. To remove this hardware from a DIN rail, first place a flathead screwdriver inside the DIN rail latch, located at the bottom of the controller. Next, holding the controller, pry in a downward motion on the latch until the latch is locked into its open position. Repeat the previous two steps for the second DIN rail latch, then unhook the top of the DIN rail slot from the rail.VIIIVThe 1762sc-IF8U is a MicroLogix 1200 Series 8-Channel Universal Analog Input Module by Allen-Bradley and Spectrum Controls. It has 8 V, C, or TC inputs and has a 16-bit resolution. The continuous electrical isolation for this hardware is 10 Volts DC (channel-to-channel isolation) and 125 Volts AC (continuous).