Automation Webstore is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Webstore's 1-year warranty.
All Major Credit
Cards Accepted
2711P-RN6 by Allen-Bradley, part of the Panelview Plus Communication Modules series
All Surplus and Refurbished products come with a 1-Year Automation Webstore Warranty.
The 2711P-RN6 is a communication module that is compatible with PanelView Plus / PanelView Plus 6 Operator Terminals. It supports a variety of communication protocol such as Data Highway + (DH+), Remote I/O (RIO) and DH485.
This module is an add-on component to the PanelView Plus / 6 terminals. For PanelView Plus, DH+, RIO and DH485 is supported while DH+ and DH485 are the supported protocols for PanelView Plus 6. This communication module may only be installed to PanelView Plus and PanelView Plus 6 700-15- terminals as the specified terminal models support add-on configuration.
The communication module has separate ports for DH485 and DH+ / RIO. For DH485, Six (6) pin phoenix connector is used while the DH+ and RIO use Three (3) pin phoenix connector. DH+ and RIO use same type of communication cable which is Belden 9463.
This module has status indicators to depict the communication state. If the indicator is OFF, channel is offline. Blinking green depicts that the device is the only active node in the network. Solid Green indicates that the device has established connection and actively receiving data. Blinking Red signals that a Duplicate node is detected if configured for DH485 and Parity error for DH+. Solid Red refers to unsuccessful self-test.
The modules operating temperature is 0 to 55 deg. C and Storage Temperature of -25 to 70 Deg. C. It carries certification C-TICK, CCC, CE, CUL, GOST, KC, UL. This module installs at the back of the of the PanelView Plus / PanelView Plus 6 hardware.
VIIIVThe 2711P-RN6 is a communication module for PanelView Plus / PanelView Plus 6 terminals. It is an add-on module with integrated Data Highway Plus (DH+), Remote I/O (RIO) and DH485 Communication port.